Multifunction, Turn Signal Switch Replacement

Multifunction, Turn Signal Switch Replacement

Removal Procedure





1. Caution: Refer to Restraint Systems in Service Precautions.

Disable the SIR system.
2. Remove the upper and lower trim covers.
3. Disconnect the electrical connectors.
4. Release the multifuction switch clips from the stalk switch mount, remove the multifunction switch.

Installation Procedure





1. Install the multifuction switch to the stalk switch mount.
2. Connect the electrical connectors.
3. Install the upper and lower trim covers.
4. Enable the SIR system.