Front Suspension

Stabilizer Shaft Insulator Replacement

Removal Procedure
1. Raise and support the vehicle.
2. Remove the front wheels.





3. Remove the stabilizer shaft mounting clamp bolts and clamps from both sides of the vehicle.
4. Remove the bushings from the stabilizer shaft.

Installation Procedure





1. Install the stabilizer bushings on the stabilizer shaft with the cut line facing rearward.

2. Notice: Refer to Fastener Notice in Service Precautions.

Install the stabilizer shaft clamps and bolts.
Tighten the bolts to 25 Nm (18 ft. lbs.).
3. Install the front wheels.
4. Lower the vehicle.