Rear Suspension

Stabilizer Shaft Insulator Replacement

Removal Procedure
1. Raise and support the vehicle.





2. Remove the stabilizer shaft insulator bracket retaining bolt.
3. Remove the stabilizer shaft and insulator.

Installation Procedure





1. Install the stabilizer shaft insulator.
2. Install the stabilizer shaft insulator brackets.

3. Notice: Refer to Fastener Notice in Service Precautions.

Install the stabilizer shaft insulator retaining bolt.
Tighten the stabilizer shaft insulator retaining bolt to 35 Nm (26 ft. lbs.).
4. Lower the vehicle.