B1015
DTC B1015
CIRCUIT DESCRIPTION
The internal fault detection is handled inside the control module. No external circuits are involved.
DTC DESCRIPTOR
This diagnostic procedure supports the following DTC:
DTC B1015 Vehicle Identification Number (VIN) Information Error
This vehicle has DTCs which include DTC Symptoms. For more information on DTC Symptoms, refer to DTC Symptom Description in Vehicle DTC Information. DTC Symptom Description
CONDITIONS FOR RUNNING THE DTC
The vehicle power mode is in Accessory, Run or RAP
CONDITIONS FOR SETTING THE DTC
A VIN matching test in the module fails to match the broadcast VIN stored at the vehicle assembly.
ACTION TAKEN WHEN THE DTC SETS
The DVD System is disabled.
CONDITIONS FOR CLEARING THE DTC
- A current DTC clears when the error is no longer present.
- A history DTC clears when the module ignition cycle counter reaches the reset threshold, without a repeat of the malfunction.
DIAGNOSTIC AIDS
- This DTC may be stored as a history DTC without affecting the operation of the module. If stored only as a history DTC and not retrieved as a current DTC, do not replace the module.
- If this DTC is retrieved as both a current and history DTC, replace the module.
TEST
