Pedal Positioning Motor: Service and Repair

ADJUSTABLE ACCELERATOR PEDAL MOTOR REPLACEMENT

REMOVAL PROCEDURE
1. Remove the adjustable accelerator pedal bracket assembly from the vehicle.




2. Remove the 3 motor assembly screws and remove the motor assembly from the adjustable accelerator bracket.

INSTALLATION PROCEDURE




1. Install the motor assembly to the adjustable accelerator bracket assembly.
2. Install the 3 screws to the adjustable accelerator bracket assembly.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the screws to 2 N.m (18 lb in).

3. Install the adjustable accelerator pedal bracket assembly to the vehicle.

IMPORTANT: Ensure that the adjustable accelerator pedal and the adjustable brake pedal are synchronized in the full forward position.

4. Calibrate the brake pedal position sensor. Refer to Brake Pedal Position Sensor Calibration in Lighting Systems.