Trunk / Liftgate Latch: Service and Repair

Latch Replacement - Rear Compartment Lid

Removal Procedure

1. Open the rear compartment.




2. Release the lock rod from the lock cylinder.
3. Remove the latch bolts from the rear compartment lid.
4. Reposition the latch to gain access to the wiring harness connector.
5. Disconnect the wiring harness connector from the latch.
6. Remove the latch assembly from the rear compartment lid.

Installation Procedure




1. Position the latch assembly into the rear compartment lid.
2. Connect the latch wiring harness connector.

Notice: Refer to Fastener Notice in Service Precautions.

3. Install the latch assembly bolts.

Tighten the bolts to 10 N.m (89 lb in).

4. Install the lock rod to the lock clip.
5. Close the rear compartment.