Sunshade Replacement (Sedan)

Sunshade Replacement (Sedan)

Removal Procedure

1. Remove the sunshade from the sunshade retainer.
2. Remove the cover from the fasteners.




3. Remove the fasteners.
4. Partially remove the headliner to access the electrical connector. Refer to Headliner Replacement.
5. Remove the sunshade.
6. Disconnect the electrical connector, if equipped.

Installation Procedure




1. Connect the electrical connector.
2. Reinstall the headliner, if lowered for electrical connector access.

Notice: Refer to Fastener Notice in Service Precautions.

3. Position the sunshade and install the fasteners.

Tighten the fasteners to 2.5 N.m (22 lb in).

4. Install the cover to the sunshade fasteners.
5. Install the sunshade to the sunshade retainer.