Timing Cover: Service and Repair

Engine Front Cover Replacement
Removal Procedure





1. Drain the cooling system. Refer to Draining and Filling Cooling System.
2. Remove the drive belt tensioner.
3. Remove the oil pan.
4. Remove the crankshaft balancer.
5. Remove the crankshaft position actuator magnet.
6. Remove the thermostat housing.
7. Remove the water pump.
8. Remove the engine front cover bolts.
9. Remove the engine front cover.
10. Remove the engine front cover gasket.

Installation Procedure





1. Install the engine front cover gasket.
2. Install the engine front cover.

Notice: Refer to Fastener Notice.

3. Install the engine front cover bolts.
Tighten the bolts to 257 Nm (18 ft. lbs.).
4. Install the water pump.
5. Install the thermostat housing.
6. Install the crankshaft position actuator magnet.
7. Install the crankshaft balancer.
8. Install the oil pan.
9. Install the drive belt tensioner.
10. Fill the cooling system. Refer to Draining and Filling Cooling System.