Brake Rotor/Disc

Front Brakes JL9/J65
^ Rotor Diameter 296.0 mm (11.653 inch)
^ Rotor Discard Thickness* 22.8 mm (0.898 inch)
^ Rotor Maximum Allowable Assembled Lateral Runout 0.05 mm (0.002 inch)
^ Rotor Maximum Allowable Scoring 1.50 mm (0.059 inch)
^ Rotor Minimum Allowable Thickness After Refinish 23.0 mm (0.906 inch)
^ Rotor Maximum Allowable Thickness Variation 0.025 mm (0.001 inch)
^ Rotor Thickness New 26.0 mm (1.023 inch)

Rear Brakes JL9/J65
^ Rotor Diameter 270.0 mm (10.630 inch)
^ Rotor Discard Thickness* 11.8 mm (0.465 inch)
^ Rotor Maximum Allowable Assembled Lateral Runout 0.05 mm (0.002 inch)
^ Rotor Maximum Allowable Scoring 1.50 mm (0.059 inch)
^ Rotor Minimum Allowable Thickness After Refinish 12.0 mm (0.472 inch)
^ Rotor Maximum Allowable Thickness Variation 0.025 mm (0.001 inch)
^ Rotor Thickness New 14.0 mm (0.551 inch)
* All brake rotors have a discard dimension cast into them. Replace any rotor that does not meet this specification. After refinishing the rotor, replace any rotor that does not meet the minimum thickness specification.