Rear Suspension

Stabilizer Shaft Replacement

Removal Procedure
1. Raise and support the vehicle.





2. Remove the stabilizer shaft bracket bolts.
3. Remove the stabilizer shaft insulators from the stabilizer shaft.





4. Remove the stabilizer link to knuckle bolts.
5. Remove the stabilizer shaft.

Installation Procedure
1. Install the stabilizer shaft.





2. Install the stabilizer shaft insulators.
3. Install the stabilizer shaft brackets.

4. Notice: Refer to Fastener Notice in Service Precautions.

Install the stabilizer shaft bracket bolts.
Tighten the stabilizer shaft insulator bracket retaining bolts to 35 Nm (26 ft. lbs.).





5. Install the stabilizer shaft links to knuckle bolts.
Tighten the bolts to 50 Nm (37 ft. lbs.).
6. Lower the vehicle.