Transmission Mount Replacement - Front

Transmission Mount Replacement - Front

Removal Procedure

1. Caution: Ensure that the vehicle is properly supported and squarely positioned. To help avoid personal injury when a vehicle is on a hoist, provide additional support for the vehicle on the opposite end from which the components are being removed.

Raise and support the vehicle.





2. Remove the front transaxle mount through bolt.





3. Remove the transaxle mount-to-transaxle attachment bolts.
4. Remove the transaxle mount from the vehicle.

Installation Procedure





1. Notice: Refer to Fastener Notice in Service Precautions.

Install the transaxle mount into the vehicle and tighten the bolts.
Tighten the transaxle mount bolts to 90 Nm (66 ft. lbs.).





2. Install the transaxle mount through bolt.
Tighten the transaxle mount through bolt to 90 Nm (66 ft. lbs.).
3. Lower the vehicle.