DTC 0035
DTC 0035
CIRCUIT DESCRIPTION
The inflatable restraint instrument panel (I/P) module deployment loop consists of an inflatable restraint I/P module, the I/P module high and I/P module low circuits. A shorting bar is used in the inflatable restraint I/P module connector, which will short together the I/P module high and I/P module low circuits, when the connector is disconnected. This will help to prevent unwanted deployment of the inflator module during servicing. During a frontal crash of sufficient force, the sensing and diagnostic module (SDM) will allow current to flow through the deployment loop in order to deploy the inflatable restraint steering wheel module. The SDM performs continuous diagnostic tests on the deployment loops to check for proper circuit continuity, and for shorts to ground or voltage. If a malfunction is detected, a DTC will be stored.
DTC DESCRIPTOR
This diagnostic procedure supports the following DTCs:
DTC 0035 Passenger Deployment Loop Circuit Capacitance High
DTC 0036 Passenger Deployment Loop Circuit Capacitance Low
CONDITIONS FOR RUNNING THE DTC
Ignition voltage is within the normal operating voltage range.
CONDITIONS FOR SETTING THE DTC
- DTC 0035 will set when the SDM detects a high capacitance condition in the I/P module deployment loop.
- DTC 0036 will set when the SDM detects a low capacitance condition in the I/P module deployment loop.
ACTION TAKEN WHEN THE DTC SETS
The SDM commands the AIR BAG indicator ON.
CONDITIONS FOR CLEARING THE DTC
The condition responsible for setting the DTC no longer exists and the scan tool Clear DTCs function is used.
DIAGNOSTIC AIDS
Thoroughly inspect the wiring and the connectors. An incomplete inspection of the wiring and the connectors may result in a misdiagnosis, causing a part replacement with the reappearance of the malfunction.
The following are possible causes of the malfunction:
- A high capacitance in the inflatable restraint I/P module inline capacitor
- A low capacitance in the inflatable restraint I/P module inline capacitor
If an intermittent malfunction exists, refer to Testing for Intermittent Conditions and Poor Connections.
TEST
