Ash Tray: Service and Repair

Ashtray Replacement

Removal Procedure





1. Remove the console trim plate. Refer to Trim Plate Replacement - Console (Removal and Replacement) .
2. Remove the instrument panel center trim panel. Refer to Trim Panel Replacement - Instrument Panel (I/P) Center (Removal and Replacement) .
3. Remove the 3 screws (3) attaching the ashtray (1) to the instrument panel.
4. Slide the ashtray out to remove.
5. Disconnect the wiring connector (2), if equipped.



Installation Procedure





1. Connect the wiring connector (2), if equipped
2. Install the ashtray (1) to the instrument panel.

Notice: Refer to Fastener Notice in Cautions and Notices.

3. Install the 3 screws (3) securing the ashtray (1) to the instrument panel.

Tighten the 3 screws to 2 N.m (18 lb in).

4. Install the instrument panel center trim panel. Refer to Trim Panel Replacement - Instrument Panel (I/P) Center (Removal and Replacement) .
5. Install the console trim plate. Refer to Trim Plate Replacement - Console (Removal and Replacement) .