Console Armrest Replacement - Front Floor

CONSOLE ARMREST REPLACEMENT - FRONT FLOOR

REMOVAL PROCEDURE




1. Lift up the floor console armrest (1).
2. Remove the armrest hinge (8).
3. Remove the console armrest latch (2), if necessary.
4. Remove the 4 screws (4) attaching the armrest inner panel (5) to the armrest (1), if necessary.

INSTALLATION PROCEDURE




1. Install the armrest inner panel (5) to the armrest (1) and secure with the 4 screws (4), if removed.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the 4 screws (4) to 2 N.m (18 lb in).

2. Install the console armrest latch (2), if removed.
3. Install the armrest hinge (8).
4. Close the floor console armrest (1).