Hinge Replacement - Floor Console Arm Rest

HINGE REPLACEMENT - FLOOR CONSOLE ARM REST

REMOVAL PROCEDURE




1. Lift up the floor console armrest (1).
2. Remove the 2 screws (6) attaching the armrest hinge (8) to the floor console.
3. Slide the armrest (1) rearward to remove the hinge (8) from the floor console.
4. Remove the 2 screws (7) attaching the hinge (8) to the armrest (1).
5. Remove the hinge (8) from the armrest (1).

INSTALLATION PROCEDURE




1. Install the hinge (8) to the armrest (1) and secure with the 2 screws (7).

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the2 screws (7) to 2 N.m (18 lb in).

2. Install the armrest (1) with hinge (8) to the floor console and secure with the 2 screws (6).

Tighten the 2 screws (6) to 2 N.m (18 lb in).

3. Close the console armrest (1).