Storage Compartment Replacement - Console End Panel

STORAGE COMPARTMENT REPLACEMENT - CONSOLE END PANEL

REMOVAL PROCEDURE




1. Remove the center console end panel (1).
2. Disconnect the electrical connector (4), if equipped.
3. Remove the liner (2) from the console end panel storage compartment (3).
4. Remove the 2 screws (5) attaching the console end panel storage compartment (3) to the center console end panel (1).
5. Tilt the storage compartment (3) downwards slightly and disengage the 2 retaining tabs (6) from beneath the compartment (3) and remove.

INSTALLATION PROCEDURE




1. Install the storage compartment (3) to the center console end panel (1) making sure the 2 retaining tabs (6) are engaged.
2. Install the 2 screws (5) attaching the storage compartment (3) to the center console end panel (1).

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the screws (5) to 2 N.m (18 lb in).

3. Install the liner (2) to the storage compartment (3).
4. Connect the electrical connector (4), if equipped.
5. Install the center console end panel (1).