Bezel Replacement - Floor Console

Bezel Replacement - Floor Console

Removal Procedure





1. Remove the console trim plate. Refer to Trim Plate Replacement - Console (Removal and Replacement) .
2. Remove the bezel (1) by disengaging the 4 retaining tabs securing the bezel to the console trim plate.
3. Disengage the 2 retaining tabs on the traction control switch (3), if equipped and remove the traction control switch (3) from the bezel (1).
4. Disengage the 2 retaining tabs on the door lock power switch (2) and remove the power door lock switch (2) from the bezel (1).



Installation Procedure





1. Install the power door lock switch (2) to the bezel (1) making sure the 2 retaining tabs are engaged.
2. Install the traction control switch (3),if equipped to the bezel (1) making sure the 2 retaining tabs are engaged.
3. Install the bezel (1) to the console trim plate making sure the 4 retaining tabs are engaged.
4. Install the console trim plate. Refer to Trim Plate Replacement - Console (Removal and Replacement) .