Striker Replacement - Instrument Panel (I/P) Compartment

STRIKER REPLACEMENT - INSTRUMENT PANEL (I/P) COMPARTMENT

REMOVAL PROCEDURE




1. Open the instrument panel compartment door (6).
2. Remove the two screws (3) attaching the instrument panel compartment door lock striker (2) to the instrument panel (1).
3. Remove the instrument panel compartment door lock striker (2) from the instrument panel (1).

INSTALLATION PROCEDURE




1. Install the instrument panel compartment door lock striker (2) to the instrument panel (1).
2. Install the two screws (3) attaching the instrument panel compartment door lock striker (2) to the instrument panel (1).

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the two screws to 2 N.m (18 lb in).

3. Close the instrument panel compartment door (6).