Garnish Molding Replacement - Windshield Pillar

GARNISH MOLDING REPLACEMENT - WINDSHIELD PILLAR

REMOVAL PROCEDURE
1. Remove the rear seat cushion.
2. Remove the rear seat back rest.
3. Partially remove the rear portion of the door sill plate to allow removal of the rear quarter trim panel.
4. Remove the rear quarter trim panel.
5. Remove the upper center pillar trim panel.
6. Remove the rear quarter upper trim panel.




7. Starting at the upper rear edge of the windshield side garnish (1), disengage the windshield side garnish attaching clips (2).

IMPORTANT: Use caution when removing the windshield side garnish to avoid damaging the side garnish locating pin.

8. Remove the windshield side garnish.

INSTALLATION PROCEDURE




1. Position the windshield side garnish.
2. Position locating pin (3).
3. Starting at the lower edge of the windshield side garnish (1), install the windshield side garnish attaching clips (2).
4. Install the rear quarter upper trim panel.
5. Install the upper center pillar trim panel.
6. Install the rear quarter trim panel.
7. Install the rear portion of the door sill plate.
8. Install the rear seat back rest.
9. Install the rear seat cushion.