Seat Switch Replacement - Power

SEAT SWITCH REPLACEMENT - POWER

REMOVAL PROCEDURE
1. Remove the front seat outer trim panel.




2. Remove 2 adjustment knobs (1) from the front seat adjustment switch (2), by prying with a small flat screwdriver.




3. Remove 3 seat adjustment switch retaining screws (1).
4. Remove the seat adjustment switch.

INSTALLATION PROCEDURE
1. Position the seat adjustment switch to the seat cushion outer trim panel.




2. Install three seat adjustment switch retaining screws (1).

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the seat adjustment switch retaining screws to 2 N.m (18 lb in).




3. Install two adjustment knobs (1) to the front seat adjustment switch (2).
4. Install the front seat outer trim panel.