Seat Back Replacement - Rear

SEAT BACK REPLACEMENT - REAR

REMOVAL PROCEDURE
1. Remove the rear seat cushion.




2. Remove two rear seat back retaining screws (1).




3. Lift the rear seat back assembly up until the seat back retaining hooks (1) release from the retaining slots (2) in the rear compartment front panel.
4. Remove the rear seat back rest from the vehicle.

INSTALLATION PROCEDURE
1. Position the rear seat back rest in the vehicle.




2. Slide the rear seat back rest retaining hooks (1) into the retaining slots (2) in the rear compartment front panel.




3. Install 2 rear seat back retaining screws (1).

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the rear seat back rest retaining screws to 30 N.m (22 lb ft).

4. Install the rear seat cushion.