Scan Tool Data Definitions

Scan Tool Data Definitions

Data Display/Definitions
The Scan Tool Data Display/Definitions contains a brief description of all the ABS/TCS data parameters. The menus available depend on the number and type of system on the vehicle and are listed below in alphanumeric order.
^ ABS DATA
^ TCS DATA
^ NORMAL MODE
^ SYSTEM CONFIGURATION
ABS Failed
The scan tool will display Yes/No. This will indicate if the ABS has failed.
ABS Pump Motor
The scan tool displays On or Off - This parameter indicates the state of the ABS pump motor.
ABS Warning Lamp
The scan tool will display On or Off depending on the state of the ABS indicator.
Brake Light Switch
The scan tool displays Applied or Released - The scan tool displays the state of the brake light switch.
Brake Switch
The scan tool displays Applied or Released - The scan tool displays the state of the brake switch.
Delivered Torque
The scan tool displays in Nm the amount of torque delivered.
DRP Disabled
The scan tool will display Yes/No. This will indicate if the DRP has been disabled.
Eng. Torque Request
The scan tool displays in Nm the requested engine torque.
Left Front Wheel Speed
The scan tool displays 0 - 255 km/h or (0 - 158 mph). The scan tool displays the actual speed of the left front wheel.
Left Rear Wheel Speed
The scan tool displays 0 - 255 km/h or (0 - 158 mph). The scan tool displays the actual speed of the left rear wheel.
LF Inlet Valve Solenoid
The scan tool will display Active or Inactive. The scan tool displays the commanded state of the LF inlet valve solenoid.
LF Outlet Valve Solenoid
The scan tool will display Active or Inactive. The scan tool displays the commanded state of the LF outlet valve solenoid.
Low Trac: TCS Active
The scan tool displays Off or On. The scan tool displays On if the TCS indicator is currently being commanded ON.
LR Inlet Valve Solenoid
The scan tool displays Active or Inactive. The scan tool displays the commanded state of the LR inlet valve solenoid.
LR Outlet Valve Solenoid
The scan tool displays Active or Inactive. The scan tool displays the commanded state of the LR outlet valve solenoid.
Rear TCS Isolation Solenoid
The scan tool displays Active or Inactive. The scan tool displays the commanded state of the rear TCS isolation valve solenoid.
Rear TCS Prime Solenoid
The scan tool displays Active or Inactive. The scan tool displays the commanded state of the rear TCS prime valve solenoid.
Requested Torque
The scan tool displays in Nm the requested torque.
RF Inlet Valve Solenoid
The scan tool displays Active or Inactive. The scan tool displays the commanded state of the RF inlet valve solenoid.
RF Outlet Valve Solenoid
The scan tool displays Active or Inactive. The scan tool displays the commanded state of the RF outlet valve solenoid.
Right Front Wheel Speed
The scan tool displays 0 - 255 km/h or (0 - 158 mph). The scan tool displays the actual speed of the right front wheel.
Right Rear Wheel Speed
The scan tool displays 0 - 255 km/h or 0 - 158 mph - The scan tool displays the actual speed of the rear wheels.
RR Inlet Valve Solenoid
The scan tool displays Active or Inactive. The scan tool displays the commanded state of the RF inlet valve solenoid.
RR Outlet Valve Solenoid
The scan tool displays Active or Inactive. The scan tool displays the commanded state of the RF outlet valve solenoid.
TCS Failed
The scan tool will display Yes/No. This will indicate if the TCS has failed.
TCS Switch State
The scan tool displays Pressed/Released. The scan tool will display the state of the Traction Control Switch.
TCS Warning Lamp
The scan tool will display On or Off depending on the state of the TCS indicator.
Traction Control Equipped
The scan tool will display Yes/No. This will indicate if the vehicle is equipped with TCS.
Valve Relay State
The scan tool displays On or Off - This parameter indicates the state of the valve relay.
VSES Equipped
The scan tool will display Yes/No. This will indicate if the vehicle is equipped with VSES.