Radiator Air Baffle Assemblies and Deflectors

Radiator Air Baffle Assemblies and Deflectors

Removal Procedure

1. Raise and support vehicle. Refer to Lifting and Jacking the Vehicle.





2. Remove four oil pan shield bolts (1), then the oil pan shield.





3. Remove four lower air baffle extension screws (1), then lower the rear of the lower air baffle extension (2).
4. Slide the lower air baffle to disengage from the lower front air baffle.
5. Remove four lower front air baffle-to-crossmember fasteners (3), then remove the front lower air baffle.

Installation Procedure





1. Position the lower front air baffle to the crossmember, then install four lower front air baffle-to-crossmember fasteners (3).
2. Slide the lower air baffle into place.
3. Install four lower air baffle extension screws (1).





Notice: Refer to Fastener Notice in Service Precautions.

4. Install four oil pan shield bolts (1), then the oil pan shield.
Tighten the oil pan shield bolts to 30 Nm (22 ft. lbs.).
5. Lower the vehicle. Refer to Lifting and Jacking the Vehicle.