Engine Valley Cover: Service and Repair
Engine Valley Cover Replacement
Removal Procedure
1. Remove the intake manifold.
2. Remove the oil pressure switch.
3. Remove the engine valley retaining bolts (1).
4. Remove the engine valley cover (2).
5. Remove the engine valley gasket (3).
6. Remove the O-rings (4) from the engine valley cover (2).
Installation Procedure
1. Install the O-rings (4) to the engine valley cover (2).
2. Install the engine valley gasket (3).
3. Install the engine valley cover (2).
4. Install the retaining bolts (1).
5. Notice: Refer to Fastener Notice in Service Precautions.
Tighten the engine valley retaining bolts.
Tighten the engine valley cover bolts to 25 Nm (18 ft. lbs.).
6. Install the intake manifold.
7. Install the oil pressure switch.