Oil Pan Cover Replacement

Oil Pan Cover Replacement
Removal Procedure





1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Remove the oil pan cover retaining nuts (452).
3. Remove the cover (434).
4. Remove the gasket (433).

Installation Procedure





1. Position the gasket (433) and cover (434) on the engine block.

2. Notice: Refer to Fastener Notice in Service Precautions.

Install the retaining nuts (452) for the cover.
Tighten the retaining bolts to 12 Nm (106 inch lbs.).
3. Lower the vehicle.