4. Clutch Pilot Bearing Removal

Clutch Pilot Bearing Removal

Tools Required
^ J43276 Clutch Pilot Bearing Remover





1. Notice: When using the J43276 Clutch Pilot Bearing Remover, always secure the J43276-1 Clutch Pilot Bearing Remover tool body using a wrench. Do not allow the J43276-1 tool body to rotate. Failing to do so causes damage to the J43276-1 tool body.

Remove the clutch pilot bearing using the J43276.
1. Install the J43276-1 into the clutch pilot bearing.
2. Using a wrench, secure the J43276-1.
3. Insert the J43276-2 into the J43276-1.
4. Rotate the J43276-2 clockwise into the J43276-1 until the clutch pilot bearing is completely removed from the crankshaft.
5. Rotate the J43276-2 counterclockwise to remove the J43276-2 from the J43276-1.
6. Remove the J43276-1 from the tool body.





2. Discard the pilot bearing.