Horn: Service and Repair

HORN REPLACEMENT

REMOVAL PROCEDURE
1. Raise and support vehicle. Refer to Vehicle Lifting.

CAUTION: Refer to Vehicle Lifting Caution in Service Precautions.

2. Remove the front fascia.




3. Disconnect the horn electrical connector (1).
4. Remove the horn assembly retaining nuts (2).
5. Remove the horn from the vehicle.

INSTALLATION PROCEDURE
1. Position the horn to the horn mounting bracket.




2. Install the horn assembly retaining nuts (2).

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the horn retaining nut to 25 N.m (18 lb ft).

3. Connect the horn electrical connector (1).
4. Install the front fascia.
5. Lower the vehicle.