Front Seat Back Position Switch Housing Assembly

FRONT SEAT BACK POSITION SWITCH HOUSING ASSEMBLY

REMOVAL PROCEDURE




1. Remove the front seat back cover.
2. Remove two micro swithch housing retaining screws.
3. Remove the micro switch (1) from the housing.

INSTALLATION PROCEDURE




1. Rotate "U" shaped cam (2) on the micro switch housing to the up position.
2. Insert the micro switch (1) into the housing, then press until the securing hooks snap into place.
3. Route the switch electrical wires harness through the hook in the housing.
4. Position the micro switch housing to the seat frame then install two micro switch housing to the seat frame retaining screws.
5. Install the front seat back cover.