Battery Positive Fuse Block Cable Replacement

BATTERY POSITIVE FUSE BLOCK CABLE REPLACEMENT

REMOVAL PROCEDURE




1. Remove the battery tray.
2. Open the stud cover on the fuse/relay center cover.
3. Remove the positive battery cable nut.
4. Remove the positive battery cable lead from the stud.
5. Remove the battery positive fuse block cable from the stud.
6. Reposition the junction block nut boot.
7. Remove the instrument panel (I/P) wiring harness junction block nut.
8. Remove the battery positive fuse block cable from the stud.
9. Remove the cable from the vehicle.

INSTALLATION PROCEDURE




1. Install and route the fuse block cable in the vehicle.
2. Install the battery positive fuse block cable to the stud.

NOTE: Refer to Fastener Notice in Service Precautions.

3. Install the I/P wiring harness junction block nut.

Tighten the I/P wiring harness junction block nut to 10 N.m (89 lb in).

4. Reposition the junction block nut boot.
5. Install the battery positive fuse block cable to the stud.
6. Install the positive battery cable lead to the stud.
7. Install the positive battery cable nut.

Tighten the positive battery cable nut to 10 N.m (89 lb in).

8. Close the stud cover on the fuse/relay center cover.
9. Install the battery tray.