Suspension: Service and Repair

Front Suspension Support Brace Replacement
Removal Procedure





1. Remove the 4 nuts (1,2,4,5) that retain the front suspension support brace (3) to the strut towers.
2. Remove the brace.

Installation Procedure





1. Install the front suspension support brace (3) to the studs on the strut towers.

2. Notice: Refer to Fastener Notice in Service Precautions.

Install the 4 nuts (1,2,4,5) to the studs in order to retain the brace to the strut towers.
Tighten the nuts to 30 Nm (22 ft. lbs.).