Torque Converter Cover: Service and Repair

Torque Converter Cover Replacement

Removal Procedure
1. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
2. Remove the starter motor, If servicing the right side transmission cover only.





3. Remove the right side transmission cover bolt.
4. Remove the right side transmission cover.





5. Remove the left side transmission cover bolt
6. Remove the right side converter cover.

Installation Procedure





1. Install the left side converter cover.

2. Notice:
Refer to Fastener Notice in Service Precautions.

Install the left side converter cover bolt.

Tighten the left side converter cover bolt to 12 Nm (106 inch lbs.).





3. Install the right side converter cover.
4. Install the right side converter cover bolt.

Tighten the right side converter cover bolt to 12 Nm (106 inch lbs.).

5. Install the starter motor, if removed.
6. Lower the vehicle.