Windshield Washer Pump: Service and Repair

WASHER PUMP REPLACEMENT

REMOVAL PROCEDURE
1. Drain the washer solvent from the washer solvent container.




2. Disconnect the washer pump electrical connector (2).
3. Disconnect the washer pump hose (1).
4. Using a small flat-bladed tool, remove the washer pump (4) from the washer solvent container (3).
5. Using a small flat-bladed tool, remove the seal from the washer solvent container (3).

INSTALLATION PROCEDURE




1. Position the seal to the washer solvent container (3), pressing in until fully seated.
2. Position the washer pump (4) to the washer solvent container (3) pressing, in until fully seated.
3. Connect the washer pump electrical connector (2).
4. Connect the washer pump hose (1).
5. Fill the washer solvent container with washer solvent.