Procedures

MOTOR REPLACEMENT - POWER MIRROR

REMOVAL PROCEDURE




1. Remove the mirror face.
2. Remove the screws from the mirror motor.




3. Disconnect the electrical connectors from the rear of the mirror motor. Note the position of the plugs on the mirror motor when removing.
4. Remove the motor.

INSTALLATION PROCEDURE




1. Position the motor to the mirror housing.
2. Connect the electrical connector to the rear of the mirror motor.




3. Install the screws to the mirror motor.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the screws to 2 N.m (18 lb in).

4. Install the mirror face to the mirror housing.
5. Inspect the mirror for proper operation.