Mirror Replacement - Power

MIRROR REPLACEMENT - POWER

REMOVAL PROCEDURE




1. Remove the front door trim panel.
2. Remove the outside rearview mirror insulator.




3. Disconnect the electrical connector from the outside rearview mirror.




4. Remove the outside rearview mirror nuts.
5. Remove the outside rearview mirror.

INSTALLATION PROCEDURE




1. Install the outside rearview mirror.
2. Install the outside rearview mirror nuts.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the nuts to 10 N.m (89 lb in).




3. Connect the electrical connector to the outside rearview mirror.




4. Install the inner panel outside rearview mirror insulator.
5. Install the front door trim panel.
6. Inspect the mirror for proper operation.