Seat Back Replacement - Rear (Folding)

Seat Back Replacement - Rear (Folding)

Removal Procedure

1. Remove the rear seat cushion. Refer to Seat Cushion Replacement - Rear (Seat Cushion Replacement - Rear) .
2. Remove the rear center seat belts. Refer to Seat Belt Replacement - Center Rear.




3. Remove the nut (1) from the child rear seat latch bracket.
4. Remove the bolts (2) from each end of the latch bracket.




5. Fold the rear seat back cushions down.
6. Remove the anchor bolts from the rear seat latches.
7. Remove the rear seat latches from the rear seat back.
8. Fold the rear seat back cushions up.
9. Reposition the seat belts from the rear seat back.
10. Remove the rear seat back from the vehicle.



Installation Procedure

1. Position the rear seat back to the vehicle.
2. Reposition the seat belts to the rear seat back.





Notice: Refer to Fastener Notice in Cautions and Notices.

3. Apply a thread sealant, GM P/N 12345382, (Canadian P/N 10953489), Loctite 242, Permatex 24200 to the threads of the bolts (2) and also the stud for the bracket nut (1).
4. Install the child seat latch bracket nut (1).
Install the child seat latch bracket bolts (2) to each end of the latch bracket.

Tighten the latch bracket nut and bolts to 42 N.m (31 lb ft).

5. Install the rear center seat belts. Refer to Seat Belt Replacement - Center Rear.




6. Fold the rear seat back cushions down.
7. Install the rear seat latches to the rear seat back.
8. Install the rear seat back anchor bolts to the rear seat latches.

Tighten the rear seat back latch bolts to 10 N.m (89 lb in).

9. Fold the rear seat back cushions up.
10. Inspect the rear seat for proper operation.
11. Install the rear seat cushion. Refer to Seat Cushion Replacement - Rear (Seat Cushion Replacement - Rear) .