Front Door Switch Bezel Replacement

BEZEL REPLACEMENT - FRONT DOOR SWITCH

REMOVAL PROCEDURE
1. Remove the front door trim pad.




2. Remove the bezel screws.
3. Remove the bezel from the trim pad.




4. Remove the switch harness.
5. Remove the switches from the door bezel.
6. Remove the bezel from the vehicle.

INSTALLATION PROCEDURE
1. Position the bezel on the door trim pad.




2. Press the switches into the bezel.
3. On the left door, install the switch harness.




4. Install the bezel screws.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the screws to 3 N.m (27 lb in).

5. Install the front door trim pad.