Seat Back Cover Replacement - Front (Except Fold Flat)

Seat Back Cover Replacement - Front (Except Fold Flat)

Removal Procedure

1. Remove the head restraint. Refer to Head Restraint Replacement - Front Seat (Head Restraint Replacement - Front Seat) .
2. Disengage the J-hook on the bottom of the seat back trim.




3. Pull the trim half-way up the seat. Use your hand to disengage the hook and loop retainers on the seat back pad.
4. Reach under the seat back cover and remove the head restraint retainers. Refer to Head Restraint Retainer Replacement - Front Seat (Head Restraint Retainer Replacement - Front Seat) .
5. Remove the seat back cover by pulling the cover up and over the pad.



Installation Procedure

1. Install the seat back cover and pull the cover one third down.
2. Install the head restraint retainers. Refer to Head Restraint Retainer Replacement - Front Seat (Head Restraint Retainer Replacement - Front Seat) .
3. Pull the trim all the way down.




4. Use firm hand pressure to fasten the hook and loop retainers, securing the cover to the pad.
5. Engage the J-hook on the seat trim bottom edge.
6. Install the head restraint. Refer to Head Restraint Replacement - Front Seat (Head Restraint Replacement - Front Seat) .