ABS Indicator Inoperative

ABS Indicator Inoperative

Circuit Description
The instrument panel cluster (IPC) turns the antilock brake system (ABS) indicator ON during the IPC bulb check for approximately 3 seconds when the ignition switch is turned to the ON position. If the electronic brake control module (EBCM) sets a DTC, the EBCM sends the IPC the command to turn the ABS indicator ON.

Test Description

Step 1 - Step 7:

The number below refers to step number on the diagnostic table.
2. This step checks if the IPC has the ability to turn the ABS Indicator ON.