Crankshaft Main Bearing
Tighten the crankshaft main bearing cap bolts in equal increments. Do not completely tighten one bolt at a time to prevent the cap from being cocked.Crankshaft Main Bearing Cap Bolt
^ First Pass 40 Nm (30 ft. lbs.)
^ Final Pass 110 degrees
Crankshaft Main Bearing Cap Bolt - Side
^ First Pass 15 Nm (11 ft. lbs.)
^ Final Pass 45 degrees
Crankshaft
^ Crankshaft Main Bearing Clearance - #1 0.0178-0.0406 mm (0.0007-0.0016 inch)
^ Crankshaft Main Bearing Clearance - #2, 3 and 4 0.0229-0.0457 mm (0.0009-0.0018 inch)
Crankshaft Main Bearing Bore Diameter 68.249 - 68.270 mm (2.6870 - 2.6878 inch)