101. Manual Valve Link and Oil Dam Assemble

Manual Valve Link and Oil Dam Assemble





1. Install the oil dam (27) into the case.
2. Assemble the manual valve link onto the manual shift detent lever/IMS detent lever.





3. Connect the manual valve link (402) to the manual valve (404).
4. Install the manual valve link spring (403).





5. Notice:
Refer to Fastener Notice in Service Precautions.

Install the manual shift detent assembly (804), and the manual shift detent bolt (805).
Tighten the bolt to 12 Nm (106 inch lbs.).





6. Carefully install the input speed sensor (440) into the case cover (400).
7. Install the input speed sensor clip (441) into the case cover (400).