Steering Column Filler Replacement

Steering Column Filler Replacement

Removal Procedure





1. Remove the left instrument panel (I/P) fuse block access hole cover.




2. Use a plastic trim tool to remove the ignition switch bezel.




3. Pull the I/P accessory trim plate rearward slightly for access to the I/P steering column opening filler panel. Refer to Trim Plate Replacement - Instrument Panel (I/P) Accessory (Removal and Replacement) .




4. Disengage the data link connector (DLC) retainers. Remove the DLC from the I/P trim pad.




5. Remove the I/P steering column opening filler screws (1, 2, 3).




6. Pull the steering column filler panel rearward to disengage the retainers. Remove the steering column opening filler panel.



Installation Procedure





1. Align the steering column opening filler panel to the I/P lower trim panel. Press the filler panel retainers into the I/P lower trim panel openings.





Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the steering column opening filler panel screws (1, 2, 3).

Tighten the screws to 2 N.m (18 lb in).





3. Align the DLC to the I/P trim pad. Install the DLC to the trim pad.




4. Install the I/P accessory trim plate. Refer to Trim Plate Replacement - Instrument Panel (I/P) Accessory (Removal and Replacement) .




5. Install the ignition switch bezel.




6. Install the left I/P fuse block access hole cover.