Fuel Level Sensor: Service and Repair

FUEL LEVEL SENSOR REPLACEMENT

REMOVAL PROCEDURE

CAUTION: Refer to Gasoline/Gasoline Vapors Caution.




1. Remove the fuel pump module assembly.
2. Remove the fuel level sensor wiring harness connector from the molded-in tab (1) on the pump module bowel.
3. Disconnect the fuel level sensor electrical connector from the pump module.
4. Depress the retaining tab (2) on the sensor and begin to slide the level sensor away from the pump module.
5. Carefully slide the level sensor the rest of the way off of the pump module.

INSTALLATION PROCEDURE




1. Carefully slide the fuel level sensor into the slots on the fuel pump module bowel.
2. Secure the retaining tab (2) on the sensor into the slot on the pump module bowel.
3. Connect the fuel level sensor electrical connector to the pump module.
4. Install the fuel level sensor wiring harness connector to the molded-in tab (1) on the pump module bowl.
5. Install the fuel pump module assembly.