B3006
DTC B3006
CIRCUIT DESCRIPTION
The body control module (BCM) monitors the voltage input of the hood open switch signal circuit and the hood open closed switch signal circuit. During proper operation, the 2 separate voltage signals at the BCM should never be the same voltage with the hood opened or closed. If the 2 voltage signal should have the same voltage value, DTC B3006 will set.
DTC DESCRIPTOR
This diagnostic procedure supports the following DTC:
DTC B3006 Hood Ajar Circuit
This vehicle has DTCs which include DTC Symptoms. For more information on DTC Symptoms, refer to DTC Symptom Description. DTC Symptom Description
CONDITIONS FOR RUNNING THE DTC
This DTC will run when the Run/Crank Relay is enabled.
CONDITIONS FOR SETTING THE DTC
If both the hood open switch signal circuit and the hood closed switch signal circuit are simultaneously in a high or low voltage state.
ACTION TAKEN WHEN THE DTC SETS
Remote start functions will be disabled.
CONDITIONS FOR CLEARING THE DTC
The DTC will clear when conditions for setting the DTC are no longer present.
TEST DESCRIPTION
Step 1 - Step 12:
The number below refers to the step number on the diagnostic table.
3. The hood ajar switch is part of the hood latch assembly.