63. Crankshaft Balancer Installation

Crankshaft Balancer Installation
- J 38122-A Harmonic Balancer Holder
- J 45059 Angle Meter





1. Notice: Ensure both components are aligned correctly or serious engine damage will occur.

Install the damper onto the crankshaft indexing keyway. Use care to properly align the keyway and flats on the damper with the oil pump drive.
2. Install the crankshaft balancer using a universal balancer installer.

3. Notice: Refer to Fastener Notice in Service Precautions.

Important: Always install a NEW crankshaft balancer retaining bolt and washer.

Install a NEW retaining bolt and washer. Prevent the crankshaft from rotating when tightening the bolt.
Tighten the bolt to 100 Nm (74 ft. lbs.) plus 125 degrees using the J 45059.