Fog/Driving Lamp: Description and Operation

FOG LAMPS

When the fog lamp switch is placed in the ON position, ground is applied through the fog lamp switch signal circuit at G201 to the body control module (BCM). The BCM applies battery voltage through the fog lamp relay control circuit to the coil side of the fog lamp relay and the fog lamps ON indicator located on the fog lamp switch. Battery voltage is applied at all times from the FOG LP fuse to the switch side of the fog lamp relay. When the relay coil is energized, the relay switch contacts close and allow battery voltage to be applied from the FOG LP fuse, through the relay switch contacts, to the fog lamps. Ground for the fog lamps is applied at all times at G101 for the left fog lamp and G102 for the right fog lamp. G101 also serves as ground for the coil side of the fog lamp relay.