Evaporative Emission (EVAP) Hoses/Pipes Replacement - Chassis/Canister

EVAPORATIVE EMISSION (EVAP) HOSES/PIPES REPLACEMENT - CHASSIS/CANISTER

REMOVAL PROCEDURE




1. Remove the fuel tank.
2. Disconnect the evaporative emission (EVAP) canister purge line quick connect fitting at the canister.
3. Remove the EVAP canister purge line (3).

INSTALLATION PROCEDURE




1. Install the EVAP canister purge line (3).
2. Connect the EVAP canister purge line quick connect fitting at the canister.
3. Install the fuel tank.