Antenna Replacement - Digital Radio

ANTENNA REPLACEMENT - DIGITAL RADIO

REMOVAL PROCEDURE
1. Remove the rear quarter upper trim panel.
2. Remove the right rear assist handle.
3. Remove the rear dome lamp.
4. Disengage the 2 rear headliner retainers.
5. Drop the right rear headliner to gain access the XM antenna.
6. Disconnect the 2 electrical connectors from the coaxial cable.




7. Remove the bolt and retainer which secure the XM antenna.
8. Remove the XM antenna from the roof.

INSTALLATION PROCEDURE




1. Install the XM antenna connectors through the hole in the roof.
2. Position the XM antenna to the hole in the roof.




3. Install the bolt and retainer which secure the XM antenna.

Tighten the antenna base bolt to 6 N.m (53 lb in).

NOTE: Fastener Notice in Service Precautions.

4. Connect the 2 electrical connectors to the coaxial cable.
5. Secure the rear headliner with the 2 plastic retainers.
6. Install the rear dome lamp.
7. Install the right rear assist handle.
8. Install the rear quarter upper trim panel.