Fixed Antenna Replacement

FIXED ANTENNA REPLACEMENT

REMOVAL PROCEDURE




1. Remove the radio antenna.
2. Pull back the rear compartment trim panel for access.
3. Disconnect the antenna cable (2) from the radio antenna bracket (3).
4. Remove the screws from the radio antenna cable.
5. Remove the radio antenna bracket (3).
6. Pull the radio antenna bezel (1) from the quarter panel.

INSTALLATION PROCEDURE




1. Press the radio antenna bezel (1) into the quarter panel opening.
2. Position the radio antenna bracket (3) to the inner quarter panel.
3. Install the radio antenna cable screws.

Tighten the screws to 10 N.m (89 lb in).

NOTE: Refer to Fastener Notice in Service Precautions.

4. Connect the antenna cable (2) to the radio antenna bracket (3).
5. Install the rear compartment trim panel.
6. Install the radio antenna.