Alarm Module: Service and Repair

THEFT DETERRENT CONTROL MODULE REPLACEMENT

REMOVAL PROCEDURE




1. Remove the instrument panel compartment door.
2. Disconnect the negative battery cable.

CAUTION: Refer to Battery Disconnect Caution in Service Precautions.

3. Disconnect the electrical connector (4) from theft deterrent module (3).
4. Remove the screw (2) from the theft deterrent module bracket (1).
5. Remove the theft deterrent module (3) with bracket (1) from the vehicle.
6. Remove the theft deterrent module (3) from bracket (1), if necessary.

INSTALLATION PROCEDURE




1. Install the bracket (1) to the theft deterrent module (3), if removed.
2. Install the theft deterrent module (3) with bracket (1) to the vehicle.
3. Secure the theft deterrent module bracket (1) with the screw (2).
4. Connect the theft deterrent module electrical connector (4).
5. Install the instrument panel compartment door.
6. Connect the negative battery cable.