Instrument Panel (I/P) - Bracket Replacement

BRACKET REPLACEMENT - INSTRUMENT PANEL (I/P) CENTER SUPPORT

REMOVAL PROCEDURE
1. Remove the upper instrument panel assembly.
2. Remove the lower instrument panel assembly.
3. Remove the connector housing bracket from the right I/P center support brace.




4. Remove the following components from the vehicle:
- The left brace nut (10)
- The right brace nut (5)
- The left brace bolt (8)
- The right brace bolt (7)
- The left I/P center support brace (9)
- The right I/P center support brace (6)

INSTALLATION PROCEDURE




1. Install the left I/P center support brace (9) and the right I/P center support brace (6) to the vehicle. Secure the braces with the following retainers:
- The left brace nut (10)
- The right brace nut (5)
- The right brace bolt (7)
- The left brace bolt (8)

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the I/P center support brace nuts and bolts to 20 N.m (15 lb ft).

2. Install the connector housing bracket to the right I/P center support brace.
3. Install the lower instrument panel assembly.
4. Install the upper instrument panel assembly.